Pressure Transmitter with Flanged Seal

Description

The PCI280 series pressure transmitters are designed to measure gauge pressure, vacuum pressure, and absolute pressure of gases, vapours, and liquids. Their stainless steel housing makes them ideal for industrial environments. Built-in circuits allow for the adjustment of zero and span.

Specifications PCI280

• Housing connector DIN 43650 IP65
• Output signal: 4-20 mA two wire transmission
• Error due to supply voltage changes: 0,005 %/V
• Supply voltage: 10,5-36 V DC (rated 24V DC)
• Ambient temperature: -40 to +80 ˚C
• Process temperature limit: -40 / 120 °C – direct measurement
• Thermal compensation range: -10 / 80 ºC
• Relative humidity: 0 / 98%
• Vibration during operation: max 4g
• Diaphragm: Stainless steel 1.4435 (316L)
• Sensing module: Stainless steel 1.4404 (316L)
• Casing for electronic parts: Steel pipe, 1.4301 (304)
• Internal sensor liquids fill: Silicone oil, chemically inactive liquid for measurement of oxygen
• Protection Degree Casing: IP65 rated (EN 60529:2003)

Specifications TETROSEAL Flanged Diaphragm Seal

• Flange Type: ANSI B16.5 Raised Face (RF) or Ring Type Joint (RTJ), EN 1092 Form B, JIS B2220
• Sizes: 1″, 1.5″. 2″, 3″, 4″ ANSI, DN25, DN40, DN50, DN80, DN100
• Flange material available in Duplex, Hastelloy, Monel, Titanium
• Diaphragm and wetted part materials available in:
• Stainless Steel 316, Alloy 20, Duplex, Hastelloy, Incoloy, Inconel, Monel, Tantalum, Titanium, Zirconium
• Coatings available in Gold, Rhodium, PFA and PTFE